Pattern Plate
Always use Takubo’s pattern plate for the takubo’ s pattern maker. Using other pattern plate or plastic patterns may damage the machine or wear blade tip fast.
HOME
What's new!
PRODUCTS
Techinical Information
PROFILE
  • Special material of high machinability that allows very beautiful cut surface
  • Shape and dimensions are finished precisely since machinability is very high.
  • Durability of machine and blade tip are kept best because it is soft and of high machinability.
Size
WidthｘLengthｘThickness
Shape
Color
Unit
Normal size
48x59x1.5mm
4 holes 1pc
Pink, Transparent
30
Large size
60x70x1.7mm
4 holes 1pc
Pink, Transparent
20
Round size
80f x1.7mm
1 hole
Pink, Transparent
50
Pattern Stocker PS-3
 Dressing Stones
Indispensable stocker for arrangement of patterns and stock control!
Patterns are taken out one by one and large and small patterns are stocked at right and left stockers. Can be placed on a table or hung on the wall depending on work place.
Good assistant to restore good grinding quality for lens edging
#100 (for roughing wheel) 5 pcs
#400 (for finishing wheel) 5 pcs
Outside dimensions
  130(W)x90(D)x250(H) mm
Order Case Screw Cutter Set
Four types of screw cutters are available depending on the screw cut length (0.6, 0.8, 1.0, and 1.2 mm)
Takubo’s order case is a integrated type. This is a very convenient order case with handle, the card drawer, and the screw drawer.
Translucent three colors are used so that contents are seen from outside depending on colors. Indispensable item for management of eye-glasses or arrangement of tools or parts. 		Screws for assembling two-point eye-glass are easily cut at right angle.
Cut screw tip is easily chamfered by rotating it pushed to the attached chamfering tool.
Item No.
  T-50（0.6・0.8・1.0・1.2）
Item name
  Screw cutter set (with chamfering tool)
Outside dimensions
  120(W)x180(D)x40(H) mm
Color
  Pink, Green, Transparent
Tool Stand Coolant Unit
Eye-glass tools are easily arranged in order. Also, tools being used for work are put in or taken out from both sides.
  • TS-1 Rotary type
    Capacity / Nippers: 12 pcs, Screwdrivers: 6 pcs
  • TS-2 Vertical type
    Capacity / Nippers: 20 pcs, Screwdrivers: 13 pcs
  • TS-3 Rotary type
    Capacity/ Screwdrivers: 10
Furnished with the functions to remove CR-39 ground refuse and bubbles and polycarbonate ground refuse. Also, can be used for edgers of other manufacturers.
Pattern File Lens Remover
Indispensable item for the correction of pattern
Use for easy removal of nyrol lens.
| HOME | | What's new! | | PRODUCTS |

| Technical Information | | PROFILE | Japanese
TAKUBO MACHINE WORKS CO., LTD.     

1-7-11, Tadanoumi-tokonoura, TAKEHARA, HIROSHIMA 729-2314 JAPAN