Frame Heater
Pursuance of Easiness and Safety!
HOME
What's new!
PRODUCTS
Techinical Information
PROFILE
A frame placed at intended angle is successfully heated pulling out the wide-use table. High thermal efficiency is obtained by the hot air blowing from top. Also, safety is secured by the temperature control and a timer.
  • Hot air blow from top ? New design that brings high thermal efficiency
  • Efficient workability with freely movable wide blow nozzle
  • Back & forth slide table to place frame
  • Heater temperature adjustable in three steps (High, Middle, Low).
  • Timer switch with bell buzzer not to forget to turn it OFF
  • Hot air / Cold air can be switched over.
  • Safety design with thermal sensor
  • Hot air blows to a spot zone by using attachment.
Outside dimensions
  120(W)x210(D)x240(H) mm
Weight
  2.4 kg
Power supply
  100-120 VAC, 230-240 VAC
Power consumption
  310W  50/60Hz
Powerful assistant for precise eye-glass making, making best use of the characteristics of frame
Frame Meter
As the first step of making an eye-glass, measure 1/2 P.D. between the right and left eyes, check the position, and then grasp the deforming of a frame. Especially, P.D. measurement of multi-focal, cylindrical, cylindrical axis, etc. inside frame requires accuracy. The frame meter FM-1 satisfies such requirements.
Easy frame P.D. measurement

Measurement for multiple purposes

Speedy measurement by one-touch operation
Setting is done to the center and parallel slide method is used for adjustment. One-touch setting allows quick measurement. Being used with a pattern maker and a lens blocker, perfect axis centering is confirmed.
P.D. reading range
  50-84 mm
1/2 P.D. reading range
  25-42 mm
Vertical reading range
  15-25 mm
Outside dimensions
  200(W)x125(D)x90(H) mm
Weight
  1.0 kg
| HOME | | What's new! | | PRODUCTS |

| Technical Information | | PROFILE | Japanese
TAKUBO MACHINE WORKS CO., LTD.     

1-7-11, Tadanoumi-tokonoura, TAKEHARA, HIROSHIMA 729-2314 JAPAN